【レポートの概要(一部)】
Table of Contents
1 Introduction (Page No. – 16)
1.1 Objectives of the Study
1.2 Market Definition
1.3 Market Scope
1.3.1 Markets Covered
1.3.2 Years Considered for the Study
1.4 Currency
1.5 Limitations
1.6 Stakeholders
2 Research Methodology (Page No. – 20)
2.1 Market Size Estimation
2.2 Market Breakdown and Data Triangulation
2.3 Market Share Estimation
2.3.1 Key Data From Secondary Sources
2.3.2 Key Data From Primary Sources
2.4 Assumptions
2.5 Key Industry Insights
3 Executive Summary (Page No. – 29)
4 Premium Insights (Page No. – 34)
4.1 Attractive Opportunities in the 3D Imaging Market
4.2 Global Market: Top Three Technology
4.3 Global 3D Imaging Technology Market
4.4 Global Market Potential
4.5 Global 3D Imaging Market (2015)
4.6 3D Imaging Regional Market
4.7 3D Imaging Growth Matrix
4.8 Life Cycle Analysis, By Region, 2015
5 Market Overview (Page No. – 41)
5.1 Introduction
5.2 Evolution
5.3 Market Segmentation
5.3.1 By 3D Display Technology
5.3.2 By 3D Imaging Solution
5.3.3 By Hardware
5.3.4 By Industry Vertical
5.3.5 By Region
5.4 Market Dynamics
5.4.1 Drivers
5.4.1.1 Growing Demand of Medical Imaging
5.4.1.2 Introduction of 4D Technology
5.4.1.3 Augmented Demand of 3D Technology in Various Segments
5.4.2 Restraints
5.4.2.1 High Cost of Solutions
5.4.2.2 Lack of Infrastructure Support
5.4.3 Opportunities
5.4.3.1 Emergence of Rapid Prototyping
5.4.3.2 Engagement of 4D Technology
5.4.4 Challenge
5.4.4.1 Lack of Availability of 3D Content
5.4.5 Wining Imperative
5.4.5.1 Focus on Auto Stereoscopy and Ar & Vr
6 Industry Trends (Page No. – 53)
6.1 Introduction
6.2 Value Chain Analysis
6.3 Porter’s Five Forces Analysis
6.3.1 Threat of New Entrants
6.3.2 Threat of Substitutes
6.3.3 Bargaining Power of Suppliers
6.3.4 Bargaining Power of Buyers
6.3.5 Intensity of Competitive Rivalry
6.4 Standards and Regulations
6.4.1 HIPPA
6.4.2 DMCA
7 Global 3D Imaging Market Analysis, By Types (Page No. – 60)
7.1 3D Display Technology
7.1.1 Introduction
7.1.2 Anaglyphy
7.1.3 Stereoscopy
7.1.4 Auto-Stereoscopy
7.1.4.1 Holography
7.1.4.2 Volumetric Display
7.2 3D Imaging Solution
7.2.1 Introduction
7.2.2 3D Modeling
7.2.3 3D Scanning
7.2.4 Layout and Animation
7.2.5 3D Rendering
7.2.6 Image Reconstruction
7.3 Hardware
7.3.1 Introduction
7.3.2 3D Display
7.3.3 3D Sensor
8 Global 3D Imaging Market Analysis, By Industry Vertical (Page No. – 81)
8.1 Introduction
8.2 Healthcare and Medical
8.3 Defense and Security
8.4 Industrial Application
8.5 Architecture and Engineering
8.6 Media and Entertainment
8.7 Others
9 Geographic Analysis (Page No. – 95)
9.1 Introduction
9.2 North America
9.2.1 U.S.
9.2.2 Canada
9.3 Europe
9.4 Asia-Pacific (APAC)
9.5 Middle East and Africa
9.6 Latin America
10 Competitive Landscape (Page No. – 120)
10.1 Overview
10.2 Competitive Situation and Trends
10.2.1 New Product Launches
10.2.2 Partnerships
11 Company Profile (Page No. – 126)
11.1 Introduction
11.2 GE Healthcare
11.2.1 Overview
11.2.2 Products and Services
11.2.3 Recent Developments
11.2.4 MnM View
11.2.4.1 Key Strategies
11.2.4.2 SWOT Analysis
11.3 Google, Inc.
11.3.1 Business Overview
11.3.2 Products and Services
11.3.3 Recent Developments
11.3.4 MnM View
11.3.4.1 Key Strategies
11.3.4.2 SWOT Analysis
11.4 Hewlett-Packard Corporation (HP)
11.4.1 Overview
11.4.2 Products and Services
11.4.3 Recent Developments
11.4.4 MnM View
11.4.4.1 Key Strategies
11.4.4.2 SWOT Analysis
11.5 Panasonic Corporation
11.5.1 Overview
11.5.2 Products and Services
11.5.3 Recent Developments
11.5.4 MnM View
11.5.4.1 Key Strategies
11.5.4.2 SWOT Analysis
11.6 Philips Healthcare
11.6.1 Business Overview
11.6.2 Products and Services
11.6.3 Recent Developments
11.6.4 MnM View
11.6.4.1 Key Strategies
11.6.4.2 SWOT Analysis
11.7 Konica Minolta, Inc.
11.7.1 Business Overview
11.7.2 Products and Services
11.7.3 Recent Developments
11.7.4 MnM View
11.7.4.1 Key Strategies
11.8 Lockheed Martin Corporation
11.8.1 Business Overview
11.8.2 Products and Services
11.8.3 Recent Developments
11.8.4 MnM View
11.8.4.1 Key Strategies
11.9 Agilent Technologies
11.9.1 Business Overview
11.9.2 Products and Services
11.9.3 Recent Developments
11.9.4 MnM View
11.9.4.1 Key Strategies
11.10 Able Software Corporation
11.10.1 Business Overview
11.10.2 Products and Services
11.10.3 Recent Developments
11.10.4 MnM View
11.10.4.1 Key Strategies
11.11 Tomtec Imaging Systems GmbH
11.11.1 Business Overview
11.11.2 Products and Services
11.11.3 Recent Developments
11.11.4 MnM View
11.11.4.1 Key Strategies
12 Appendix (Page No. – 155)
12.1 Insights of Industry Experts
12.2 Discussion Guide
12.3 Introducing RT: Real-Time Market Intelligence
12.4 Available Customizations
12.5 Related Reports
【レポート販売概要】
■ タイトル:3Dイメージングの世界市場:技術(アナグリフィ、立体視、ホログラフィー、立体ディスプレイ)、ソリューション(3Dモデリング、3Dスキャニング)、装置(3Dディスプレイ、3Dセンサ)■ 英文:3D Imaging Market by Display Technology (Anaglyphy, Stereoscopy, Auto-stereoscopy), Imaging Solution (3D Modeling, 3D Scanning), Hardware (3D Display, 3D Sensor), Industry Vertical, & Region - Global Forecast to 2020
■ 発行日:2015年8月20日
■ 調査会社:MarketsandMarkets
■ 商品コード:MAM-TC-1446
■ 調査対象地域:グローバル
- 世界の塗料市場2015:展望、戦略、技術The report provides a worldwide strategic overview of the paints and coatings market, including:• Sales forecasts for major market segments.• Sales forecasts for key geographic regions: North America, Europe, Asia Pacific, Latin America, Africa, Mideast.In addition, the report reviews the major U.S. and international regulatory, technological, economic, demographic, and social trends wit …
- 世界の3Dプリンター市場機会分析3D printing technology is considered to be one of the fastest growing technologies with numerous uses and applications for 3D printers and services across different application sectors. It has revolutionized various industries such as medical, aerospace, consumer products and automotive. This technology facilitates the printing of products of finest quality with highest accuracy by building the pr …
- 触媒コンバーターの世界市場予測(~2021):三元触媒コンバータ、選択接触還元、ディーゼル酸化触媒、リ—ンNOxトラップ触媒The catalytic converter market is projected to grow at a CAGR of 8.05% from 2016 to 2021, to reach a market size of USD 55.16 Billion by 2021. Stringent fuel efficiency norms, increasing vehicle demand, and production are the major drivers for the catalytic converter market. Selective Catalytic Reduction (SCR) is the fastest growing segment globally, in terms of value and volume. The demand for SC …
- 電磁クラッチの世界市場展望2017-20276According to Stratistics MRC, the Global Electromagnetic Clutches market is accounted for $3,273.14 million in 2017 and is expected to reach $5,344.91 million by 2026 growing at a CAGR of 5.6%. The growing trend and evolving consumer preference towards manual to semi-automatic or fully-automatic transmission systems are expected to favorably impact the global electromagnetic clutches market growth …
- 化学療法誘発性骨髄抑制(Chemotherapy Induced Myelosuppression):治療薬開発パイプライン動向(2015年上半期版)Chemotherapy Induced Myelosuppression - Pipeline Review, H1 2015 Summary Global Markets Direct’s, ‘Chemotherapy Induced Myelosuppression - Pipeline Review, H1 2015’, provides an overview of the Chemotherapy Induced Myelosuppression’s therapeutic pipeline. This report provides comprehensive information on the therapeutic development for Chemotherapy Induced Myelosuppression, complete with comparati …
- マシンビジョンカメラの世界市場2018-2022About this market Machine vision cameras were primarily used in the industrial sector due to their ability to perform inspection independently, with minimal intervention, coupled with their wide applications in the industrial segment. However, due to the growing popularity of machine vision systems and the benefits they offer, these systems find broad application even in non- industrial applicatio …
- 世界の不織布ろ材市場動向(2012-2016)TechNavio’s analysts forecast the Global Nonwoven Filter Media market to reach US$3.88 billion by 2016. One of the key factors contributing to this market growth is the emerging demand from developing countries. The Global Nonwoven Filter Media market has also been witnessing development of next-generation nonwoven filter media. However, regulatory standards and guidelines could pose a challenge t …
- 世界主要国のスマートグリッド用同期位相計測器市場:市場規模、価格、予測Synchrophasors in Smart Grid in Key Countries, Update 2014 - Market Volume, Average Price and Market Size Forecasts to 2020 Summary GlobalData, the industry analysis specialist, has released its latest research, “Synchrophasors in Smart Grid in Key Countries, Update 2014 - Market Volume, Average Price and Market Size Forecasts to 2020”, which provides in-depth analysis of the synchrophasor market …
- サブストレートライクPCB(SLP)の世界市場予測(~2024年)“High adoption of SLP by leading OEMs to drive overall growth of substrate-like PCB market” The substrate-like PCB market is expected to grow from USD 1.1 billion in 2018 to USD 2.6 billion by 2024, at a compound annual growth rate (CAGR) of 15.6% during the forecast period. The substrate-like PCB market is driven by various factors, such as the high adoption of SLPs by leading OEMs, the surge in …
- Pakistan Petroleum Limited:石油・ガスバリューチェーン分析レポート2013Pakistan Petroleum Limited Analysis Across the Oil and Gas Value Chain Report, 2013 Update Summary "Pakistan Petroleum Limited" Analysis Across the Oil and Gas Value Chain is an essential source for data, analysis and strategic insight into “Pakistan Petroleum Limited”. The report provides key information relating to oil and gas assets of the company along with its operations across the value chai …
- テレコム分析の世界市場:構成要素別(ソリューション&サービス)、展開別(クラウド&オンプレミス)、組織規模別(大企業&中小企業)、用途別(顧客管理、ネットワーク管理、販売&マーケティング管理、リスク&コンプライアンス管理、その他)Telecom analytics incorporates sophisticated business intelligence technologies that are designed to meet the complex requirements of telecom organizations. These include increase in sales, reducing churn and fraud, improving risk management, and decreasing operational costs. In addition, telecom analytics streamlines telecom analytics processes and decreases costs by improving the response as wel …
- シリコンカーバイドの世界市場分析:製品別(ブラックシリコンカーバイド、グリーンシリコンカーバイド)、エンドユーザー別(鉄鋼・エネルギー、自動車、航空宇宙・航空、軍事・防衛、医療・ヘルスケア、電子・半導体)、セグメント予測、-2020The Global Silicon Carbide Market is expected to reach USD 4.49 billion by 2020, according to a new study by Grand View Research, Inc. Positive outlook on steel manufacturing, for which SiC is used as a deoxidizing agent is expected to drive silicon carbide demand. In addition, silicon carbide is an essential element in the manufacturing of semiconductors which is expected to witness significant g …
- 血友病A(Hemophilia A):世界の治験レビュー2014年下半期版Hemophilia A Global Clinical Trials Review, H2, 2014 Summary GlobalData's clinical trial report, “Hemophilia A Global Clinical Trials Review, H2, 2014" provides data on the Hemophilia A clinical trial scenario. This report provides elemental information and data relating to the clinical trials on Hemophilia A. It includes an overview of the trial numbers and their recruitment status as per the sit …
- ナノクレイの世界市場2010-2025Main end user markets for nanoclays are packaging, plastics, automotive and rheology modifiers. Secondary markets include academia and research, water filtration, flame retardant materials, medical and biomaterials and paints, pigments, coatings and dyes. This 41 page report from Future Markets, Inc. offers an in depth insight into the global nanoclays market including applications, markets and pr …
- 頭蓋顎顔面(CMF)装置/システムの世界市場分析:製品別(頭蓋フラップ固定、CMF伸延、TMJ交換、胸部固定、骨移植片代替品)、材料別、用途別、セグメント予測、2014-2025The global craniomaxillofacial (CMF) devices market is expected to reach USD 2.68 billion by 2025, according to a new report by Grand View Research, Inc. Increasing incidences of facial fractures and demand for minimally invasive surgery for reconstruction are expected to drive the CMF devices market over the forecast period. The associated benefits with minimally invasive reconstructive surgeries …